Water Jet Cutter Splash Guard Mold

Project Summary

This is a mold for making replacement silicone splash guard.

Project Details

Print these two parts out of PETG.

You will need:

  • 4 bolts and matching nuts. Sized: 5/16th inch.
  • 1/8 or less inch thick sheet of rubber.
  • Mold release spray.
  • Chemically-curable silicon for the mold. (11.6 mL per guard.)


  1. Print the parts out.
  2. Cut the rubber. (Using the rubber template.)
  3. Spray the plastic parts with the mold release.
  4. Sandwich the parts together and secure them with the bolts.
  5. Pour the silicon and let it cure.
Average (0 Votes)

Related Assets
Remote Assets